Industrial Boiler Projects

Thermal oil boiler is one of the most widely used industrial boilers. During use, there will be more or less problems, especially if improper operation will cause injury to people. Therefore, it is important to understand what should be noted during operation.

When operating a thermal oil furnace, we should pay attention to the following points:

1. During the start-up operation of the heat-conducting oil furnace, we must ensure that its auxiliary exhaust valve must be closed. If the valve is not closed, serious consequences will occur, such as the boiler being scrapped and a fire.

2. If an emergency situation requires emergency shutdown of the furnace, we cannot flush the furnace with water.

3. During the heating process of the heat-conducting oil furnace, we must periodically open the drain pipe at the bottom of the expansion tank to release condensed water.

4. According to the type of heat-conducting boiler, select the appropriate heat-conducting oil. Do not try to save money to buy unqualified heat-conducting oil or mess with heat-conducting oil.

5. After the boiler is used for half a year, the heat transfer oil must be tested according to sampling. If a problem is found, the heat transfer oil should be replaced immediately.

6. During the operation, we must always pay attention to whether the pressure difference of the heat transfer oil furnace is normal. If it is abnormal, you must stop it, otherwise it may cause serious consequences.

7. When stopping the furnace, stop the hot oil pump when the temperature of the heat transfer oil drops below 70 ° C.

When operating a heat-conducting oil furnace, we must not take care and always pay attention to the operation of the boiler. Only with careful operation will the life of the boiler be extended.